American Diagnostic Corporation Pro's Combo I
American Diagnostic Corporation · Model Pro's Combo I
The 788 palm style sphygmomanometer and color coordinated matching professional Adscope™ 641 Sprague 804 gauge with integral bulb not made with natural rubber latex and trigger style air release valve for one-hand convenience Precision crafted 300mmHg Japanese engineered movement tested to 50,000 cycles Adcuff™ nylon cuff with ADC’s proprietary Size Guide™ marking system Quick release luer slip connector Extra large, color-matched dual pocket carry case (measures 9” x 5” x 2”) Ideal for nurses, PA’s, and EMT’s Assembled, inspected, and packaged in the U.S.A. from foreign components Meets or exceeds ANSI/AAMI/ISO 81060-1.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Aneroid gauge out of calibration
MediumSymptoms: Gauge reads high or low versus a reference, needle not at zero at rest, sticky needle.
Root cause: Mechanical wear in the movement or a shock event; 300 mmHg movement drifts over cycles.
Inflation bulb / air-release valve fault
MediumSymptoms: Bulb will not build pressure, deflates too fast or not at all, trigger valve sticks.
Root cause: Cracked bulb, worn one-way valve, or a fouled trigger air-release valve.
Cuff bladder or tubing leak
MediumSymptoms: Pressure will not hold, slow steady drop on the gauge.
Root cause: Perforated bladder, cracked tubing, or a leaking luer/quick-release connector.
Stethoscope acoustic loss
LowSymptoms: Muffled or absent sound, air leak at the eartips or tubing.
Root cause: Hardened or cracked tubing, missing eartips, or a loose chestpiece.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Inflation bulb and air-release valve
Class Periodic replacementRel. cost $R&R Easy
Cuff bladder and tubing
Class Periodic replacementRel. cost $R&R Easy
Aneroid gauge / movement
Class Major service partRel. cost $$R&R Fairly easy
Stethoscope ear tips and tubing
Class Periodic replacementRel. cost $R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Inflation bulb and air-release valve | Periodic replacement | $ | Easy |
| Cuff bladder and tubing | Periodic replacement | $ | Easy |
| Aneroid gauge / movement | Major service part | $$ | Fairly easy |
| Stethoscope ear tips and tubing | Periodic replacement | $ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Gauge suspected inaccurate
- Check the needle rests at zero with no pressure applied.
- Tee the gauge to a calibrated reference manometer and compare at 60, 150 and 250 mmHg.
- If error exceeds +/-3 mmHg, replace the gauge/movement - the ADC 300 mmHg movement is not field-adjustable to spec.
- Re-verify against the reference after replacement.
- Tag with the calibration date.
Symptom: Cuff will not hold pressure
- Inflate to ~200 mmHg with the valve closed and watch the gauge.
- A steady fall = leak; check the bladder, tubing, bulb valves and the quick-release connector with leak solution or by submersion.
- Replace the leaking bladder/tubing or bulb assembly.
- Confirm the trigger air-release valve opens and closes cleanly.
- Re-test pressure hold before returning to service.
Technical Specs
- Sphyg Type:
- Pro's Combo
- Gauge:
- 804N
- Gauge Warranty:
- Lifetime
- Sphyg Accuracy:
- +/-3mmHg @ 50ºF(10ºC) - 104ºF(40ºC)
- Storage Temp:
- -4ºF (-20ºC) - 131ºF(55ºC)
- Valve Type:
- Integral
- Number of tubes:
- 1 Tube
- Cuff type:
- ADCUFF
- Cuff size:
- Adult
- Cuff Range:
- 23-40cm
- Inflation Warranty:
- 3 Year
- Cuff color:
- Burgundy
- Zipper / Storage case:
- 888BD
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio