Aesculap GD670
Aesculap · Model GD670
Touch Screen with clear, self-explaining symbols and intuitive user dialog for easy operation Customizable settings: Acceleration and stopping characteristics for individual motors, oscillation angle and much more can be adapted to your individual preference The versatile control unit combined with the microspeed® uni motors and handpieces designed for specific indications Two motor connection sockets for effortless switching between the motors Integrated irrigation pump allows precise adjustments of the pump flow.
Key tips
- ·Never defeat or bypass a return-electrode monitoring (REM) alarm to finish a case - it's a direct burn risk.
- ·Verify OR table battery backup - a table that loses power mid-procedure is a real, documented incident type.
- ·Track surgical light lamp-hours rather than waiting for failure - a sudden failure mid-case is avoidable.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Handpiece will not run or is weak
HighSymptoms: Drill / saw / reamer motor does not run, weak torque, speed not reaching set, stalls.
Root cause: Worn motor / gearbox, a damaged handpiece cable / connector, or a console drive fault.
Overheating handpiece / motor
MediumSymptoms: Handpiece or motor gets hot, thermal cut-out during use.
Root cause: Worn bearings, a dry / worn gearbox, or use beyond the duty cycle.
Attachment / chuck coupling fault
MediumSymptoms: Attachments will not lock, burrs / blades slip or wobble, coupling worn.
Root cause: Worn attachment coupling or chuck.
Footswitch / hand-control fault
MediumSymptoms: Console does not respond to the footswitch or hand control, direction / mode will not change.
Root cause: Footswitch / hand-control switch or cable fault.
Console / power-supply fault
LowSymptoms: Console dead, will not power on, error on the display.
Root cause: Power supply or control board.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Handpiece motor / gearbox
Class Periodic replacementRel. cost $$$R&R Moderate
Handpiece cable / connector
Class Periodic replacementRel. cost $$R&R Fairly easy
Attachment coupling / chuck
Class Periodic replacementRel. cost $$R&R Fairly easy
Footswitch / hand control
Class Periodic replacementRel. cost $$R&R Fairly easy
Console power supply / control board
Class Major service partRel. cost $$$R&R Difficult
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Handpiece motor / gearbox | Periodic replacement | $$$ | Moderate |
| Handpiece cable / connector | Periodic replacement | $$ | Fairly easy |
| Attachment coupling / chuck | Periodic replacement | $$ | Fairly easy |
| Footswitch / hand control | Periodic replacement | $$ | Fairly easy |
| Console power supply / control board | Major service part | $$$ | Difficult |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Pre-case functional check
- ·Electrosurgical return-electrode cable inspection
- ·Table hydraulic / mechanical inspection
- ·Annual electrical safety test and full PM
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Handpiece will not run / weak
- Test the handpiece at low and high speed in both directions.
- Substitute a known-good handpiece / motor if available.
- Check the handpiece cable and connector.
- Confirm the footswitch and console respond.
- Escalate a confirmed console drive fault to Aesculap; service the handpiece gearbox / bearings per the schedule.
Symptom: Attachment slips / will not lock
- Inspect the attachment coupling and chuck for wear.
- Confirm the attachment is fully seated and locked.
- Replace the coupling / chuck.
- Test with a known-good attachment.
- Confirm burrs / blades run true with no wobble.
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Operating rooms
- Procedure rooms
- Interventional suites
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio