Adroit Medical Systems Mobile ICE® MI-12L
Adroit Medical Systems · Model Mobile ICE® MI-12L
Designed to help increase range of motion Can be used on an exercise board, floor or table Foam padding and vinyl upholstery for comfort Secured with strong and adjustable hook & loop straps Four premium swivel ball casters.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Pump not running / no flow / pad not at temperature
HighSymptoms: Pump silent or running with no water movement, pad not heating or cooling.
Root cause: Air lock, low fluid / ice, a kinked hose, a clogged filter, low power, or a heater / chiller fault.
Does not reach or hold set temperature
HighSymptoms: Water not reaching the set point, over- or under-temperature.
Root cause: Heater element or a temperature-sensor / control fault.
Over-temperature safety trip
MediumSymptoms: Unit stops, over-temp indication.
Root cause: Sensor or control fault driving the heater high, or a failed safety thermostat.
Reservoir / connector leak
LowSymptoms: Water pooling, level drops between uses.
Root cause: Cracked reservoir or worn quick-connect couplings.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Circulation pump
Class Periodic replacementRel. cost $$R&R Moderate
Heater / chiller element
Class Major service partRel. cost $$R&R Moderate
Temperature sensor / safety thermostat
Class Major service partRel. cost $$R&R Moderate
Inlet filter
Class Frequent wear itemRel. cost $R&R Easy
Therapy pad / wrap and hoses
Class Frequent wear itemRel. cost $$R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Circulation pump | Periodic replacement | $$ | Moderate |
| Heater / chiller element | Major service part | $$ | Moderate |
| Temperature sensor / safety thermostat | Major service part | $$ | Moderate |
| Inlet filter | Frequent wear item | $ | Easy |
| Therapy pad / wrap and hoses | Frequent wear item | $$ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: No flow / not at temperature
- Confirm the reservoir is filled and the pump runs.
- Check hoses and clamps for kinks or occlusions.
- Clean the inlet filter.
- Verify the heater / chiller draws current and the water changes temperature.
- Replace the pump or heater / sensor as isolated.
Symptom: Over-temperature trip
- Let the unit cool.
- Compare the displayed temperature to an independent thermometer.
- Replace the temperature sensor if it disagrees.
- Check the safety thermostat.
- Verify the unit holds set point before returning to use.
Technical Specs
- Height
- 14 in
- Length
- 11 in
- Weight
- 6 lbs
- Width
- 10 in
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio