Acare Technology · Model VRT-002
VRA-781 suction regulator (American type 0-760mmHg, w/ barb adapter) Single layer roller stand w/ 2000cc reusable jar + disposable liner x 2set w/ Tandem tube x 1 w/ Roller stand hose x
Failure patterns typical of this equipment class - general BMET reference, not verified against this exact unit's own service history unless flagged. Severity is a category-level estimate.
Symptoms: Low vacuum, slow recovery.
Root cause: Diaphragm/motor fatigue.
Symptoms: Leak, loss of vacuum.
Root cause: Cracked canister / stuck float.
Symptoms: Reduced flow, overheats.
Root cause: Inline filter saturated.
The parts a BMET typically services on this class of equipment. Service class and relative cost are general engineering estimates for the category, not figures from this unit's documentation. Part numbers appear only when pulled from this unit's own service manual. Always confirm intervals and pricing against the manufacturer.
Most-replaced wear kit.
Consumable.
Consumable.
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Diaphragm pump kit Most-replaced wear kit. | Periodic replacement | $$$ | Moderate |
| Collection canister & float Consumable. | Consumable | $ | Easy |
| Inline bacterial filter Consumable. | Consumable | $ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
A structured starting point derived from the failure modes above. Follow the manufacturer's service documentation for the actual procedure.
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
No documents available for this device yet.
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →