ZEISS Artevo 800
ZEISS · Model Artevo 800
Digital and hybrid modes 175mm focal distance lens SCI (Stereo-Coaxial Illumination) Wireless foot pedal Xenon, LED, and halogen illumination options (x2) integrated 3-Chip 4K Cameras Onboard monitor External 55” 4K 3D video monitor AdVision technology places relevant information on screen workflow Ergonomic binoculars with electronic inverters Integrated swing assistant binocular 12.5x or 10x eyepieces available Light filters optional DICOM compatible ZEISS RESIGHT Fundus viewing systems like Resight 700 with 60D and 128D lenses compatible. RESCAN 700, OCT imaging compatible CALLISTO eye compatible.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Illumination failure or dim / uneven light
HighSymptoms: No or dim light, sudden loss during a procedure, colour shift, uneven field.
Root cause: Xenon lamp module at end of life, its igniter / power supply, or (LED models) the LED engine / driver.
Suspension / AutoBalance / swing-arm drift
HighSymptoms: Head drifts, AutoBalance fails, arm will not hold after draping or an accessory change.
Root cause: Balance drive or the magnetic brakes; re-balance after any accessory change.
Motorised zoom / focus / XY fault
MediumSymptoms: Zoom, focus or XY will not run or is erratic from the handgrips, mouth switch or foot control.
Root cause: Drive motor, a control, or cabling.
System error in the data-injection / touchscreen display
HighSymptoms: Error message in the eyepiece data injection or on the touchscreen, function inhibited.
Root cause: An internal subsystem fault - acknowledge via the handgrip pushbutton or touchscreen; if it will not clear, service is required.
Integrated video / fluorescence / digital-visualisation fault
LowSymptoms: No or poor video, fluorescence mode not working, digital (Artevo) image fault.
Root cause: Camera / fluorescence module or a video / processing fault.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Xenon lamp module (or LED engine)
Class Frequent wear itemRel. cost $$R&R Moderate
Balance drive / magnetic brake assembly
Class Major service partRel. cost $$$$R&R Expert-level
Zoom / focus motor assembly
Class Major service partRel. cost $$$R&R Difficult
Wireless foot-control panel
Class Major service partRel. cost $$$R&R Fairly easy
Touchscreen assembly
Class Major service partRel. cost $$$R&R Difficult
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Xenon lamp module (or LED engine) | Frequent wear item | $$ | Moderate |
| Balance drive / magnetic brake assembly | Major service part | $$$$ | Expert-level |
| Zoom / focus motor assembly | Major service part | $$$ | Difficult |
| Wireless foot-control panel | Major service part | $$$ | Fairly easy |
| Touchscreen assembly | Major service part | $$$ | Difficult |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: No or dim light
- Switch to the onboard spare lamp if the model has one.
- Unplug, let the lamp cool and replace the lamp module.
- Check the igniter / power-supply output and the mains fuse.
- Confirm the lamp is seated.
- Verify even, full-brightness illumination.
Symptom: Head will not hold position / system error
- Re-balance / run AutoBalance for the current accessory load - never over the operating field.
- Acknowledge any data-injection / touchscreen error via the handgrip pushbutton or touchscreen.
- If the error will not clear, attach an out-of-order sign and contact the ZEISS service representative.
- For a drive fault, set the emergency switch to manual mode and operate zoom/focus by hand.
- Do not use for surgery until cleared.
Documents & Manuals
No documents available for this device yet.
Safety & Recalls
Synced live from the FDA openFDA API.
- RECALL
When the user tilts the transmitted light arm of the microscope to the end of its axis range, laser safety can be bypassed and result in emission of class lIlb laser radiation. This issue arises when a ZEISS inverted stage stand (Axio Observer or Axio Vert) is used in as a component of the LSM 700, 800 and 900 system
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio