Slitlamp Microscopes MS-102
Slitlamp Microscopes · Model MS-102
SLIT LAMP MICROSCOPE This is a slitlamp microscope used for ophthalmology and eye examination. The magnification is selectable between 10x, 16x and 25.6x. The 25.6x magnification is obtained by using the included 16x eyepiece pair. It has an optional R and T type applanation tonometer as well as has an option for a measuring eyepiece. The lens is made from high quality imported German glass for reduction in lens aberration. All optics are multi-coated and include mildew-proof and antireflection coatings. This slit lamp microscope is made in a US FDA (Food and Drug Administration) registered manufacturing facility as well as has CE certification.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Illumination lamp failure or dim / uneven slit
HighSymptoms: No or dim slit, uneven illumination, colour shift.
Root cause: Halogen / LED source at end of life, a bulb-holder / contact fault, or a rheostat fault.
Slit / aperture / filter mechanism fault
MediumSymptoms: Slit width, length, angle or filter selection will not change or sticks.
Root cause: Worn slit mechanism or filter turret.
Joystick / base motion fault
MediumSymptoms: Coarse or fine movement binds, drifts, or the locking screw is ineffective.
Root cause: Dry or worn base slide / bearings, or a loose locking screw.
Optics contamination
LowSymptoms: Haze, spots, or reduced image quality through the oculars.
Root cause: Dust or fingerprints on the objective, oculars, or mirrors.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Illumination source (halogen / LED)
Class Frequent wear itemRel. cost $R&R Fairly easy
Rheostat / illumination control
Class Major service partRel. cost $$R&R Moderate
Slit mechanism / filter turret
Class Major service partRel. cost $$$R&R Difficult
Base-slide bearings / glide plate
Class Major service partRel. cost $$R&R Moderate
Mains fuse
Class Major service partRel. cost $R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Illumination source (halogen / LED) | Frequent wear item | $ | Fairly easy |
| Rheostat / illumination control | Major service part | $$ | Moderate |
| Slit mechanism / filter turret | Major service part | $$$ | Difficult |
| Base-slide bearings / glide plate | Major service part | $$ | Moderate |
| Mains fuse | Major service part | $ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: No or dim slit
- Replace the source (let it cool first) and check the bulb-holder contacts.
- Operate the rheostat through its range for a dead spot.
- Check the mains fuse (unplug first).
- Confirm even slit illumination at full and low intensity.
- Clean the projection optics and mirror.
Symptom: Base or joystick motion binds
- Confirm the locking screw is released.
- Clean the base glide plate and lightly lubricate per the manual.
- Check the bearings / slide for wear or debris.
- Replace worn base-slide bearings.
- Confirm smooth coarse and fine movement and a firm lock.
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio