Samsung Accuvix A30

Samsung logo Samsung · Model Accuvix A30

Ergonomic Design: flexible controls, articulated monitor arms, all-new user interface, central locking (conveniently locking with foot control) Dynamic MR Plus: The Dynamic MR Plus is a 2D image feature which enhances detection and contrast resolution while decreasing speckle echoes. Enhanced DPDI: The Accuvix A30 with its enhanced Directional Power Doppler Imaging (DPDI) detects peripheral blood vessels. Thyroid ElastoScan: The extreme sensitivity of Thyroid ElastoScan™ enables early detection of tumors by analysing changes or abnormalities in thyroid tissue. Breast and Cervix ElastoScan: ElastoScan is a highly accurate, cutting-edge technology that assists with the early detection and differentiation of malignant tumors and various other diseases. Volume NT & IT (NT: Nuchal Translucency, IT: Intracranial Translucency) is an innovative 3D technology that captures more detailed and comprehensive views of the mid-sagittal plane. HD Volume Imaging: HD Volume Imaging (HDVI) uses a special filtering technique to remove unwanted noise, while simultaneously improving the visualisation of the edges and small structures in volume data. Advanced 3D Feature: VSI, SFVI, Smooth Cut, FAD. More comprehensive and realistic images which lead to increased accuracy in scans and diagnosis. Colour Opt Flow (enables colour and power imaging of blood flow and is compatible with Doppler sensitivity settings). Hybrid Beamforming Engine (enables more indepth and detailed scanning). HD ADVR (enables simultaneous scanning and recording, and allows users to choose desired recording areas). 54.61cm (21.5) Full HD LED Monitor for sharper, easier-to-view images. EZ Exam (transforms frequently used step-by-step exams into one single, streamlined procedure to offer enhanced usability).

Key tips

·Never bypass a radiation interlock to "just get the image" - this is one of the few true zero-tolerance rules in BMET work.
·Trend image-quality phantom results over time - drift shows up before an outright failure does.
·Portable/mobile units take real physical abuse from transport - check wheel locks and cable strain reliefs more often than fixed units.

Typical Failure Modes

Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.

Poor 2D image quality across multiple probes
High
Symptoms: Noisy, low-contrast or non-uniform image, missing sector, drop-out that follows the system not the probe.
Root cause: Front-end / beamformer board fault, a probe-port (connector) board fault, or a system-board fault.
Transducer not recognised / probe-port fault
Medium
Symptoms: A probe works on one port but not another, or is not detected at all.
Root cause: Worn probe-port connector or a scan-connector board fault.
Will not boot / intermittent shutdown
High
Symptoms: Dead system, hangs at boot, or powers off under load.
Root cause: Power supply / DC converter, the system battery, or a system-board fault.
Control panel / touchscreen or monitor fault
Medium
Symptoms: Unresponsive TGC sliders or keys, distorted or blank display.
Root cause: Control-panel board, touchscreen, or the monitor.
Overheating / loud cooling fan
Low
Symptoms: Thermal-shutdown warning, fan roar, hot exhaust.
Root cause: Failed or dust-clogged cooling fan or blocked air path.
DICOM / network / storage fault
Low
Symptoms: Studies will not send to PACS, images will not archive, worklist empty.
Root cause: Network configuration or a storage-drive fault.

Serviceable Parts & Consumables

Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.

Front-end / beamformer board

Class Major service partRel. cost $$$$R&R Difficult

Probe-port / scan-connector board

Class Major service partRel. cost $$$R&R Difficult

Power supply / DC converter

Class Major service partRel. cost $$$R&R Difficult

Control-panel / touchscreen assembly

Class Major service partRel. cost $$$R&R Moderate

Cooling fan

Class Major service partRel. cost $R&R Moderate

System hard drive

Class Major service partRel. cost $$R&R Moderate

Part	Service class	Relative cost	R&R difficulty
Front-end / beamformer board	Major service part	$$$$	Difficult
Probe-port / scan-connector board	Major service part	$$$	Difficult
Power supply / DC converter	Major service part	$$$	Difficult
Control-panel / touchscreen assembly	Major service part	$$$	Moderate
Cooling fan	Major service part	$	Moderate
System hard drive	Major service part	$$	Moderate

Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.

PM Checklist

Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.

·Daily QC per modality: image-quality phantom test
·Tube and detector inspection
·Annual state-required radiation safety survey
·Vendor-scheduled preventive maintenance

Troubleshooting Approach

A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.

Symptom: Poor image quality or a probe not recognised

Try the probe on a second port and a known-good probe on the suspect port.
Wipe off all gel, inspect the lens, and scan a phantom or your own forearm.
Inspect the probe-port connectors for bent pins or debris.
Run any built-in front-end / channel diagnostics.
Replace the probe-port board or front-end board as isolated.

Symptom: Will not boot or shuts down

Confirm mains and the on/off sequence per the manual.
Check the power-supply / DC-converter outputs.
Note any boot / POST beep or code.
Reseat the system boards.
Refer the power supply or system board as isolated.

Typical Location

Where this class of equipment is typically deployed - general reference, not this unit's own placement record.

Radiology / Imaging department
Emergency Department (portable units)
Operating Room (C-arms)
Cath lab
Bedside ICU (portable X-ray)

Documents & Manuals

Troubleshoot this device with Bio

Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.

Ask Bio

Samsung Accuvix A30

Samsung logo Samsung · Model Accuvix A30

Key tips

·Never bypass a radiation interlock to "just get the image" - this is one of the few true zero-tolerance rules in BMET work.
·Trend image-quality phantom results over time - drift shows up before an outright failure does.
·Portable/mobile units take real physical abuse from transport - check wheel locks and cable strain reliefs more often than fixed units.

Typical Failure Modes

Poor 2D image quality across multiple probes
High
Symptoms: Noisy, low-contrast or non-uniform image, missing sector, drop-out that follows the system not the probe.
Root cause: Front-end / beamformer board fault, a probe-port (connector) board fault, or a system-board fault.
Transducer not recognised / probe-port fault
Medium
Symptoms: A probe works on one port but not another, or is not detected at all.
Root cause: Worn probe-port connector or a scan-connector board fault.
Will not boot / intermittent shutdown
High
Symptoms: Dead system, hangs at boot, or powers off under load.
Root cause: Power supply / DC converter, the system battery, or a system-board fault.
Control panel / touchscreen or monitor fault
Medium
Symptoms: Unresponsive TGC sliders or keys, distorted or blank display.
Root cause: Control-panel board, touchscreen, or the monitor.
Overheating / loud cooling fan
Low
Symptoms: Thermal-shutdown warning, fan roar, hot exhaust.
Root cause: Failed or dust-clogged cooling fan or blocked air path.
DICOM / network / storage fault
Low
Symptoms: Studies will not send to PACS, images will not archive, worklist empty.
Root cause: Network configuration or a storage-drive fault.

Serviceable Parts & Consumables

Front-end / beamformer board

Class Major service partRel. cost $$$$R&R Difficult

Probe-port / scan-connector board

Class Major service partRel. cost $$$R&R Difficult

Power supply / DC converter

Class Major service partRel. cost $$$R&R Difficult

Control-panel / touchscreen assembly

Class Major service partRel. cost $$$R&R Moderate

Cooling fan

Class Major service partRel. cost $R&R Moderate

System hard drive

Class Major service partRel. cost $$R&R Moderate

Part	Service class	Relative cost	R&R difficulty
Front-end / beamformer board	Major service part	$$$$	Difficult
Probe-port / scan-connector board	Major service part	$$$	Difficult
Power supply / DC converter	Major service part	$$$	Difficult
Control-panel / touchscreen assembly	Major service part	$$$	Moderate
Cooling fan	Major service part	$	Moderate
System hard drive	Major service part	$$	Moderate

Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.

PM Checklist

Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.

·Daily QC per modality: image-quality phantom test
·Tube and detector inspection
·Annual state-required radiation safety survey
·Vendor-scheduled preventive maintenance

Troubleshooting Approach

A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.

Symptom: Poor image quality or a probe not recognised

Try the probe on a second port and a known-good probe on the suspect port.
Wipe off all gel, inspect the lens, and scan a phantom or your own forearm.
Inspect the probe-port connectors for bent pins or debris.
Run any built-in front-end / channel diagnostics.
Replace the probe-port board or front-end board as isolated.

Symptom: Will not boot or shuts down

Confirm mains and the on/off sequence per the manual.
Check the power-supply / DC-converter outputs.
Note any boot / POST beep or code.
Reseat the system boards.
Refer the power supply or system board as isolated.

Typical Location

Where this class of equipment is typically deployed - general reference, not this unit's own placement record.

Radiology / Imaging department
Emergency Department (portable units)
Operating Room (C-arms)
Cath lab
Bedside ICU (portable X-ray)

Documents & Manuals

Troubleshoot this device with Bio

Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.

Ask Bio

Samsung Accuvix A30

Key tips

Typical Failure Modes

Poor 2D image quality across multiple probes

Transducer not recognised / probe-port fault

Will not boot / intermittent shutdown

Control panel / touchscreen or monitor fault

Overheating / loud cooling fan

DICOM / network / storage fault

Serviceable Parts & Consumables

PM Checklist

Troubleshooting Approach

Symptom: Poor image quality or a probe not recognised

Symptom: Will not boot or shuts down

Typical Location

Documents & Manuals

Troubleshoot this device with Bio

Samsung Accuvix A30

Key tips

Typical Failure Modes

Poor 2D image quality across multiple probes

Transducer not recognised / probe-port fault

Will not boot / intermittent shutdown

Control panel / touchscreen or monitor fault

Overheating / loud cooling fan

DICOM / network / storage fault

Serviceable Parts & Consumables

PM Checklist

Troubleshooting Approach

Symptom: Poor image quality or a probe not recognised

Symptom: Will not boot or shuts down

Typical Location

Documents & Manuals

Troubleshoot this device with Bio