Liko AB · Model 2027007
Stand-up mobile patient lifting system, electric
Failure patterns typical of this equipment class - general BMET reference, not verified against this exact unit's own service history unless flagged. Severity is a category-level estimate.
Symptoms: Fraying, visible thread wear at stress points.
Root cause: Repeated load cycles and laundering.
Symptoms: Difficult to latch, clip doesn't seat fully.
Root cause: Metal fatigue or plastic clip wear.
Symptoms: Weight limit / inspection tag worn away.
Root cause: Repeated laundering and handling.
The parts a BMET typically services on this class of equipment. Service class and relative cost are general engineering estimates for the category, not figures from this unit's documentation. Part numbers appear only when pulled from this unit's own service manual. Always confirm intervals and pricing against the manufacturer.
Replace, don't repair, once webbing is compromised.
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Sling (full replacement) Replace, don't repair, once webbing is compromised. | Periodic replacement | $$ | Easy |
| Buckle / clip hardware | Periodic replacement | $ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
A structured starting point derived from the failure modes above. Follow the manufacturer's service documentation for the actual procedure.
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
No documents available for this device yet.
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →