Inceler Medikal Modus Basic ESWT
Inceler Medikal · Model Modus Basic ESWT
It is the most powerful Radial Shockwave Therapy device in the market. It provides impulses up to 22 Hz and 5 bar. Lightweight & portable (13,5 kg). You can treat patients anywhere, anytime. Modus Basic with built-in compressor is designed for manual use. User can manually set power, frequency and mode.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Weak or no shockwave output
HighSymptoms: Low perceived energy at the applicator, treatment ineffective, pressure not reaching the set bar.
Root cause: Built-in compressor losing pressure, or a worn projectile / transmitter tip in the handpiece.
Handpiece will not fire or frequency is erratic
MediumSymptoms: No pulses when triggered, frequency unstable below the 22 Hz maximum.
Root cause: Trigger switch or the solenoid valve that drives the projectile.
Compressor overheating / thermal cutout
MediumSymptoms: Unit stops during a long treatment, restarts after cooling.
Root cause: Blocked cooling vents or a worn compressor working hard.
Air leak in the handpiece hose
LowSymptoms: Hiss, slow pressure build, reduced output.
Root cause: Cracked hose or worn O-rings/seals.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Handpiece projectile and transmitter tips
Wear items; replace on output loss or a defined pulse count.
Class Frequent wear itemRel. cost $$R&R Fairly easy
O-ring / seal kit
Class Frequent wear itemRel. cost $R&R Fairly easy
Compressor piston / valve kit
Class Periodic replacementRel. cost $$$R&R Difficult
Trigger switch
Class Periodic replacementRel. cost $R&R Moderate
Air hose
Class Periodic replacementRel. cost $R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Handpiece projectile and transmitter tips Wear items; replace on output loss or a defined pulse count. | Frequent wear item | $$ | Fairly easy |
| O-ring / seal kit | Frequent wear item | $ | Fairly easy |
| Compressor piston / valve kit | Periodic replacement | $$$ | Difficult |
| Trigger switch | Periodic replacement | $ | Moderate |
| Air hose | Periodic replacement | $ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Weak or no output
- Fit fresh projectile and transmitter tips.
- Check the air hose and connections for leaks.
- Verify the compressor builds to the set pressure with the handpiece idle.
- Rebuild the compressor if it will not hold pressure.
- Re-verify output at a known power/frequency setting.
Symptom: Handpiece will not fire
- Confirm pressure is available and the mode/power are set.
- Test the trigger switch continuity.
- Listen for the solenoid valve actuating.
- Replace the trigger switch or valve as found.
- Confirm stable firing across the frequency range.