Amico Standard Overbed Tables
Amico · Model Standard Overbed Tables
Secondary Surface -Integrated Accessory Rail -Various Top Styles Available -Cup Holders -Vanity Drawer -Urinal Hook -Seamless Spillguard Edge -Various Base Style Available -Low Profile Base.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Height-adjustment mechanism drift or bind
MediumSymptoms: Tabletop drops under load, will not stay at height, or is stiff to raise.
Root cause: Worn gas cylinder / spring or a contaminated column slide.
Caster / base mobility fault
MediumSymptoms: Table rolls unevenly, a caster is seized or wobbling, brake will not hold.
Root cause: Hair and debris wrapped in the caster, worn bearing, or a failed brake.
Tabletop surface / spillguard-edge damage
LowSymptoms: Cracked or delaminated top, lifting edge banding, fluid ingress into the core.
Root cause: Impact, heat, or chemical damage to the laminate and the seamless spillguard edge.
Accessory-rail or drawer hardware loosening
LowSymptoms: Vanity drawer sticks or falls out, accessory rail loose, urinal hook missing.
Root cause: Fasteners backing out from repeated use.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Height-adjustment gas cylinder / spring
Class Major service partRel. cost $$R&R Moderate
Caster set with brake
Class Periodic replacementRel. cost $R&R Fairly easy
Laminate tabletop with spillguard edge
Class Major service partRel. cost $$R&R Moderate
Drawer slide and accessory-rail hardware kit
Class Major service partRel. cost $R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Height-adjustment gas cylinder / spring | Major service part | $$ | Moderate |
| Caster set with brake | Periodic replacement | $ | Fairly easy |
| Laminate tabletop with spillguard edge | Major service part | $$ | Moderate |
| Drawer slide and accessory-rail hardware kit | Major service part | $ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Tabletop will not hold its height
- Load the top to typical weight and try to set several heights.
- If it sinks slowly, the gas cylinder/spring has lost charge - replace it.
- If it binds, clean and lubricate the column slide per the manufacturer's instructions.
- Cycle full travel and confirm it holds at top, middle and bottom.
- Check the release lever/cable adjustment.
Symptom: Table hard to roll or a caster is seized
- Tip the table and clear hair and lint from all caster axles.
- Spin each caster and check for a rough or seized bearing.
- Test the braking caster - it must fully lock.
- Replace any caster that is rough, cracked or won't brake.
- Confirm the table rolls straight and parks solid.
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
- Amico Overbed Table Ordering GuideUser Manual · External
- Amico Overbed Table User ManualUser Manual · External
- Table User ManualUser Manual · External
- Table Ordering GuideUser Manual · External
- Amico Patient Room Furniture BrochureBrochure · External
- Patient Room Furniture BrochureBrochure · External
- Amico Overbed Table Spec SheetDocument · External
- Table Spec SheetDocument · External
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio